Also happy to help, but I am away from my machine at the moment, will send logs asap.
Also happy to help, but I am away from my machine at the moment, will send logs asap.
Can you try to scan with this patch, then post the npvr.log? It wont work, but hopefully the logs will help.
(I'm just heading out for an hour or so)
It may not be what you expected Sub, but with the modified unmanaged.dll, the scan ran. I didnt change anything else, I promise. Just to prove it, after I had copied the log, I put the original unmanaged.dll back and scanned again, with the same failure as before.
Logs from both runs are attached.
Server: Ci5 2500k, 3GB, Windows 7 32bit, nPVR 2.6.2. 2xWinTV-DVB-T USB, 1xWinTV-DVB-T PCI, 1xPCTV290E and 1xPCTV460E on Astra 28.2 E.
clients: 2xAcer R3600, 3xAcer R3700, PCH-A110.
I can confirm, with the new dll it suddenly works.
Attached the logs from FilterCheck and npvr. I cancelled the channel scan after a few seconds, I hope that's enough for the log.
Thanks for your incredible fast help!
Last edited by owilsky; 2012-10-02 at 09:17 PM. Reason: typo
OK, channel scan does work now, I setup all my channels and the EPG. But when I want to start LiveTV all I get is
Attached the log.Code:unable to find available capture device
OK, after looking at the log it's obvious that you need the other files too ;-)
So here's NPVR.log, NRecord.log, ndigitalhost-20.log and ndigitalhost-21.log.
Looking at the ndigitalhost log files I see that the "ConnectPins failed: hr = 80040217" message is there again.
Any ideas?
Kind regards,
Oliver
I will start a new thread with this new problem as the subject has changed, has nothing to do with channel scanning.
It's still the same problem, so I've deleted your other thread.Originally Posted by owilsky
See if this patch helps.
Weird. I tried the new dll and only get a freeze while NextPVR says "...please wait...". Logs are attached. But now I get the same results with the patched dll from earlier above, also a freeze and only two log files, not four as before...
Oliver
------------
Using NextPVR 2.5.9 on Win7 Home Premium 64bit on an
Asus M4N78-AM Mainboard, AMD Athlon II X2 215, 4 GB RAM, 500 GB HDD + NAS, 2xTechnoTrend S-2400, ATI Radeon HD 3450 with analog TV-Out on good old CRT TV (100Hz)
My avatar shows the world's best composer!!!
It looks like your nrecord.exe isn't starting due to a socket already being in use. Try rebooting.
Posting Permissions
Reply With Quote