Emulation on MVP only works w/o MVPSpecificSettings?

[cginzel]

I've just recently upgraded from GBPVR using an old MVP that was working fine previously. Now with NextPVR I installed the MVPMC to get the .ts streaming support. Apparently I incorrectly identified the MAC address the first time when running the NMTInstall2, but everything "worked". What I did notice is the offset was not correct and the display was being clipped slightly. So after some research I realized the mistake and reran the install correctly and low and behold I started seeing the MVPMC menu and whenever I selected Emulation, it would eventually end up back on the MVPMC menu again... What I found is that if I removed the <MVPSpecificSettings></MVPSpecificSettings> section from the config.xml, it would work again, but all be it with the display alignment issues again. Can anyone explain what I should do to get this corrected? Thanks and sorry if this was asked before. I did not find it when I searched. The NMT Syntax Check gives me the following:


Checking for mvpmc share on CHARLES-824B065
mvpmc C:\mvpmc

Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found

NMT IP Address: 192.168.11.103 MAC 000DFE0084DE

GB-PVR Not Installed

N-PVR Installed C:\Documents and Settings\All Users\Application Data\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/CHARLES-824B065:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>

config.xml entry found Client Type PCH2
MVPClientType PCH2
MVPWidth 720
MVPHeight 560
MVPOffsetX 40
MVPOffsetY 20
MVPSendIncrementalUpdates true

Enabled true
Port 8866

The remote server returned an error: (404) Not Found.

Checking NMT Version

Checking NMT Display

Calling NMT Source

[mvallevand]

NMTInstall2 was designed for use with the NMT not MVP. You will need to change config.xml to MVP mode where it now says PCH2

After that you will have to work on a screen resolution.

Ideally just use the settings you are using with GBPVR otherwise maybe start with.

600
440
20
20

Martin

[cginzel]

Yes Martin! That worked like a charm. Perfect. Thanks!!!