NPVR with Tuner Card and External DirecTV box
Alright so a few things. I am confused greatly by how to configure this properly.
I would be willing to write this up as a How To when I am finished as I think it is a pretty common scenario. Maybe it is already available somewhere and I am just searching for the wrong things.
So I am running Windows XP SP3. I have a Hauppauge HVR-1800 tuner card. I have DirecTV and a external box that is used to decode the signal. The box is hooked up to the tuner card with the coax cable and the tuner needs to be set on channel 3. So maybe this is the problem and the DirecTV box needs to be hooked up with S-Video or something other than the coax cable.
So here is where I am confused and maybe this is the whole problem. But how do I keep the tuner on channel 3 and import the EPG data for the DirecTV box into NPVR and then use an irblaster to change the channels on the DirecTV box instead of changing the tuner channel?
I found a great post that outlined how to use ISS to change the channels on the DirecTV box. But it doesn't talk about anything other than that, like how to correctly hook up the DirecTV box to the tuner card and how to configure NPVR properly with the correct EPG data to be able to record TV shows properly.
So needless to say I am confused about how to properly configure the EPG data with the correct device listed in the NPVR configuration. I have the TV Guide listing there after subscribing to Schedules Direct but not sure if just changing the Channel Changer to use ISS is the right way to make this happen.
When you import your channels, you need to set the 'input source' to 'fixed-channel' and the channel number to 3. See here:
Originally Posted by WannaBeGeekster
Awesome! Thanks Sub. That is what I thought, but when I imported it last time it said fixed channel:123 and each channel had a different number. I am assuming that is correct now though. Thanks again!
Originally Posted by sub