Getting hauppage HVR 950q QAM to work

**superflysocal** · 2009-03-30, 05:59 PM

I have copy and pasted the entries for this tuner card in dba.ini. I am able to select this tuner entry but when scanning for channels to map digital channels it ultimately crashes and freezes.

the card's QAm tuner works fine on BeyondTV

Please help.

This is what I added to bda.ini:

[Hauppauge HVR-950Q]
TUNING_TYPE=ATSC
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

as posted by Sub.

**sub** · 2009-03-30, 06:37 PM

Post the config.exe.log and config.exe-native.log and I'll take a look. Make sure you have the patches from the survival guide thread installed.

**imagn** · 2009-03-30, 07:56 PM

Originally Posted by superflysocal

I have copy and pasted the entries for this tuner card in dba.ini. I am able to select this tuner entry but when scanning for channels to map digital channels it ultimately crashes and freezes.

the card's QAm tuner works fine on BeyondTV

Please help.

This is what I added to bda.ini:

[Hauppauge HVR-950Q]
TUNING_TYPE=ATSC
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

as posted by Sub.

If you are trying to get QAM you need the following to be added the above is only for OTA

[Hauppauge HVR-950Q (QAM)]
TUNING_TYPE=ATSC
TUNING_SPECIAL=2
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

This might help, but not sure if not post logs

**superflysocal** · 2009-04-03, 12:42 AM

Originally Posted by imagn

If you are trying to get QAM you need the following to be added the above is only for OTA

[Hauppauge HVR-950Q (QAM)]
TUNING_TYPE=ATSC
TUNING_SPECIAL=2
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

This might help, but not sure if not post logs

Just checked, i did use that in my bda.ini

my config.exe is too long to post. is there a certain part of the log you want me to post?

perhaps this:

Code:

2009-03-26 09:05:54.419	VERBOSE	[1]	labelAction.Text = Saving new listings and channel information
2009-03-26 09:07:07.606	VERBOSE	[1]	getValue() loading new key/value into cache: /settings/BDAUsePsiParser
2009-03-26 09:07:07.606	VERBOSE	[1]	getValue: /settings/BDAUsePsiParser : true
2009-03-26 09:07:07.606	VERBOSE	[1]	BDA Channel Mapping screen loading...
2009-03-26 09:07:07.606	VERBOSE	[1]	getValue() loading new key/value into cache: /settings/BDASubmitTuningRequestTwiceOnScan
2009-03-26 09:07:07.606	VERBOSE	[1]	getValue: /settings/BDASubmitTuningRequestTwiceOnScan : true
2009-03-26 09:07:07.621	VERBOSE	[1]	getValue cached value: /settings/BDAUsePsiParser : true
2009-03-26 09:07:07.621	VERBOSE	[1]	Using PSI Parser
2009-03-26 09:07:17.105	VERBOSE	[1]	ATSC device...
2009-03-26 09:07:18.871	VERBOSE	[1]	Trying double submit...
2009-03-26 09:07:21.137	VERBOSE	[1]	getValue() loading new key/value into cache: /settings/BDAPsiScanStartupSeconds
2009-03-26 09:07:21.137	VERBOSE	[1]	getValue: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:22.152	INFO	[1]	Tranponder information for: 2,0,0
<transponder>
</transponder>
2009-03-26 09:07:24.418	VERBOSE	[1]	Trying double submit...
2009-03-26 09:07:26.668	VERBOSE	[1]	getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:27.668	INFO	[1]	Tranponder information for: 3,0,0
<transponder>
</transponder>
2009-03-26 09:07:29.949	VERBOSE	[1]	Trying double submit...
2009-03-26 09:07:32.199	VERBOSE	[1]	getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:33.215	INFO	[1]	Tranponder information for: 4,0,0
<transponder>
</transponder>
2009-03-26 09:07:35.480	VERBOSE	[1]	Trying double submit...
2009-03-26 09:07:37.746	VERBOSE	[1]	getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:38.746	INFO	[1]	Tranponder information for: 5,0,0

or this:

Code:

</transponder>
2009-03-26 09:13:32.806	VERBOSE	[1]	Trying double submit...
2009-03-26 09:13:34.931	VERBOSE	[1]	getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:13:35.931	VERBOSE	[1]	getValue() loading new key/value into cache: /settings/BDAPsiScanWaitSeconds
2009-03-26 09:13:35.931	VERBOSE	[1]	getValue: /settings/BDAPsiScanWaitSeconds : 15
2009-03-26 09:13:50.947	INFO	[1]	Tranponder information for: 68,0,0
<transponder>
 <network_id>0</network_id>
 <transport_stream_id>103</transport_stream_id>
 <original_network_id>0</original_network_id>
 <service>
  <TSID>0</TSID>
  <service_ID>6</service_ID>
  <service_type>0</service_type>
  <pmt_PID>463</pmt_PID>
  <pcr_PID>464</pcr_PID>
  <video_PID>464</video_PID>
  <audio_PID lang="000" audio_type="0" AC3="true">465</audio_PID>
  <scrambled>true</scrambled>
 </service>
 <service>
  <TSID>0</TSID>
  <service_ID>1</service_ID>
  <service_type>0</service_type>
  <pmt_PID>873</pmt_PID>
  <pcr_PID>848</pcr_PID>
  <video_PID>848</video_PID>
  <audio_PID lang="000" audio_type="0" AC3="true">849</audio_PID>
  <scrambled>true</scrambled>
 </service>
 <service>
  <TSID>0</TSID>
  <service_ID>32769</service_ID>
  <service_type>0</service_type>
  <pmt_PID>4969</pmt_PID>
  <pcr_PID>848</pcr_PID>
  <video_PID>848</video_PID>
  <audio_PID lang="000" audio_type="0" AC3="true">849</audio_PID>
 </service>
 <service>
  <TSID>0</TSID>
  <service_ID>32774</service_ID>
  <service_type>0</service_type>
  <pmt_PID>4559</pmt_PID>
  <pcr_PID>464</pcr_PID>
  <video_PID>464</video_PID>
  <audio_PID lang="000" audio_type="0" AC3="true">465</audio_PID>
 </service>
</transponder>
2009-03-26 09:13:50.947	VERBOSE	[1]	Adding tuning request: 68,68,6~P:6~V:464~A:465~PMT:463~PCR:464~E:T~N:>68.6  Unknown1* (000(AC3))
2009-03-26 09:13:50.947	VERBOSE	[1]	Adding tuning request: 68,68,1~P:1~V:848~A:849~PMT:873~PCR:848~E:T~N:>68.1  Unknown2* (000(AC3))
2009-03-26 09:13:50.947	VERBOSE	[1]	Adding tuning request: 68,68,32769~P:32769~V:848~A:849~PMT:4969~PCR:848~N:>68.32769  Unknown3* (000(AC3))
2009-03-26 09:13:50.947	VERBOSE	[1]	Adding tuning request: 68,68,32774~P:32774~V:464~A:465~PMT:4559~PCR:464~N:>68.32774  Unknown4* (000(AC3))

**imagn** · 2009-04-05, 01:36 AM

I would start a thread in the support section, reproduce your problem on the machine, then zip and attache all files in the devnz/gbpvr/log folder as it will be more visible to everyone

Thread: Getting hauppage HVR 950q QAM to work

Thread Tools

Display

Getting hauppage HVR 950q QAM to work

Posting Permissions