Can this be used with GBPVR? I don't actually have one yet, but probably will in the near future.
http://support.gateway.com/s/vidcard...08116Rnv.shtml
Can this be used with GBPVR? I don't actually have one yet, but probably will in the near future.
http://support.gateway.com/s/vidcard...08116Rnv.shtml
Gateway GM5664 with Vista Premium SP1 Transferred to Antec Fusion HTPC case
AMD Phenom 9600 Quad Core 2.3GHZ, 3GB PC5300 667MHZ Memory
3 Tuners: Avermedia Duet PCIe, HVR-1250 PCIe
LG GGC-H20N Blu-ray / HDDVD ROM Drive, Visiontek HD 3650 512 MB Graphics (Cat 9.6)
Sound Blaster X-Fi XtremeGamer, Gyration Media Center Remote Control
HDD: 30GB OCZ Vertex SSD - OS, 1TB (2x500GB) - Recordings
GBPVR: 1.4.7, Plugins - SuperSimpleArchiver, GBPVRCLi/LCD Smartie for VFD, Music Plugin
The digital side of it should work. I'm not sure if the analog side would work or not.
If you havnt got the card yet, then you should consider going with a common card like one of the Hauppauge one. Its a lot more likely that the cause of any bugs will get found and fixed on common cards than these cards that very few people own.
I'm not buying it, If I were to buy a card I would buy the Hauppauge 2250. It is in a set of computer equipment I am receiving and I was thinking of keeping it for the new HTPC I am slowly building.
Good advice as always Sub.
Gateway GM5664 with Vista Premium SP1 Transferred to Antec Fusion HTPC case
AMD Phenom 9600 Quad Core 2.3GHZ, 3GB PC5300 667MHZ Memory
3 Tuners: Avermedia Duet PCIe, HVR-1250 PCIe
LG GGC-H20N Blu-ray / HDDVD ROM Drive, Visiontek HD 3650 512 MB Graphics (Cat 9.6)
Sound Blaster X-Fi XtremeGamer, Gyration Media Center Remote Control
HDD: 30GB OCZ Vertex SSD - OS, 1TB (2x500GB) - Recordings
GBPVR: 1.4.7, Plugins - SuperSimpleArchiver, GBPVRCLi/LCD Smartie for VFD, Music Plugin
I received the card. It looks like the BDA/Direct.ini entries are already there:
[ViXS PureTV BDA]
TUNING_TYPE=ATSC
FILTER_TUNER=ViXS PureTV Digital TV Tuner
FILTER_CAPTURE=ViXS PureTV Digital TV Receiver
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
[ViXS PureTV]
INIT_MODE=VIXS
INIT_MSP=0
BLACKBIRD=1
FILTER_CROSSBAR=ViXS PureTV Crossbar
FILTER_CAPTURE=ViXS PureTV Capture
FILTER_TV_TUNER=ViXS PureTV Analog TV Tuner
FILTER_TV_AUDIO=ViXS PureTV TV Audio
FILTER_ENCODER=ViXS PureTV Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_I2S_OUT=Audio Out
PIN_CAPTURE_656_OUT=Video Out
PIN_ENCODER_I2S_IN=Audio In
PIN_ENCODER_656_IN=Video In
PIN_ENCODER_OUT=PS Out
PIN_WRITER_INPUT_IN=Input
ViXS PureTV is the name of the driver, so I am thinking it is already in the ini files. I will validate though.
Nice one Sub it looks like I am covered.
Gateway GM5664 with Vista Premium SP1 Transferred to Antec Fusion HTPC case
AMD Phenom 9600 Quad Core 2.3GHZ, 3GB PC5300 667MHZ Memory
3 Tuners: Avermedia Duet PCIe, HVR-1250 PCIe
LG GGC-H20N Blu-ray / HDDVD ROM Drive, Visiontek HD 3650 512 MB Graphics (Cat 9.6)
Sound Blaster X-Fi XtremeGamer, Gyration Media Center Remote Control
HDD: 30GB OCZ Vertex SSD - OS, 1TB (2x500GB) - Recordings
GBPVR: 1.4.7, Plugins - SuperSimpleArchiver, GBPVRCLi/LCD Smartie for VFD, Music Plugin