Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Can't use both HDHomeRun tuners with GBPVR..

  1. #1

    Can't use both HDHomeRun tuners with GBPVR..

    Using the latest release (Beta 5) of the HDHomeRun Software.. I have two capture sources setup, channels mapped (both tuners working in GBPVR's Config) and verified my bda.ini settings for the HDHomeRun.

    I started a recording on one channel, tried to watch another (Live TV) and get the No Tuner available message. I also started a recording and tried to start a second recording on another channel - I got a similar message (asking to cancel the first recording)...

    "Did you add both capture sources, or just one?"

    Yes - two capture sources added, one pointing to tuner0 and one pointing to tuner1.

    Should this be working in the current HDHomeRun software version?

    Do we need the new HDHomeRun Manager running at all times (after we use it to 'Install All')?

    I've attached my LOGS

  2. #2
    Join Date
    Nov 2003
    Location
    NextPVR HQ, Wellington, New Zealand
    Posts
    76,024
    I'm sure this is just a configuration issue. Can you zip and attach your gbpvr.db3 file?

    Do we need the new HDHomeRun Manager running at all times (after we use it to 'Install All')?
    I dont really know anything about what the HDHomeRun BDA drivers need behind the scenes, so I cant really answer this one.

  3. #3
    Join Date
    Mar 2006
    Posts
    21
    I do not have mine running all the time and it is working fine here
    Dell Optiplex GX 260
    P4 2.0
    1 Gig RAM
    4 x Seagate 300 gig drives
    ATI 9800
    2 x Hauppauge 980 ( WinTV-PVR-250 ) PCI
    1 X HD Home Run
    NEC Black IDE DVD Burner Model ND-1300A

  4. #4
    gbpvr.db3 attached..

    maybe not.. having trouble uploading a 4.41 MB file to the forum..

  5. #5
    Can I email you the zip?

    It seems like the upload times-out around 75%.... I've tried several times...

  6. #6
    Join Date
    Nov 2003
    Location
    NextPVR HQ, Wellington, New Zealand
    Posts
    76,024
    yes, send it to me at support@devnz.com

  7. #7
    left via gmail.....

  8. #8
    Show Status from the Tray does show both capture sources (Sleeping)..

  9. #9
    Join Date
    Nov 2003
    Location
    NextPVR HQ, Wellington, New Zealand
    Posts
    76,024
    can you also email your bda.ini file?

  10. #10
    I got it working.. Using the HDHomeRun Manager, I Uninstalled both tuners and then Installed them (to BDA Driver) again.. though they did show that they had been installed and they were working in the GBPVR Config.

    Seems to be working good now....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •